Used pallet racking is the fastest way to add storage capacity without spending new-rack money. Inspected used systems typically cost 40 to 60 percent less than new while carrying the same load ratings, which is why most Atlanta warehouses expanding on a budget buy used.
At Atlanta Pallet Racking, we stock used teardrop uprights, beams, wire decking, and complete bays, plus drive-in, push-back, and cantilever systems as they come available. Everything is inspected before it enters inventory and everything is quoted the same day.
We also buy. If you are clearing a facility, we will quote your racking and handle the teardown.
Call us at (404)-793-8487 or click below for a free estimate.
Inventory moves fast, so call to confirm current availability. Typical stock:
| Component | Common Sizes | Notes |
|---|---|---|
| Teardrop uprights | 42″ and 48″ deep x 8′, 12′, 14′, 16′, 18′, 20′, 24′ tall | Most common Atlanta request is 48″ x 16′ |
| Teardrop beams | 8′, 9′, 10′, 12′ long x 3″, 4″, 5″ face | Sold in pairs, capacity varies by face height |
| Wire decking | 42″ x 46″, 46″ x 46″, 42″ x 52″ | Waterfall and flush styles |
| Starter bays | 2 uprights, 4 beams, decking | Complete bay ready to install |
| Add-on bays | 1 upright, 4 beams, decking | Extends an existing run |
| Cantilever | Single and double sided | For pipe, lumber, and long loads |
| Drive-in and push-back | Varies by lot | Availability is intermittent, call to check |
Every component is inspected for bends, cracked welds, rust, and connector wear before it is sold. Nothing damaged past ANSI MH16.1 tolerances goes into stock. Call us at (404)-793-8487 or click below for a free estimate.
Pricing depends on style, condition, and quantity, but the market ranges are predictable. Used uprights commonly run $50 to $100 each and used beams $20 to $45 depending on length and capacity. Complete used starter bays typically land around $500 with add-on bays closer to $410. Across a full system, used racking generally saves 40 to 60 percent against new.
Universal teardrop holds value best because it is the most widely compatible style. Proprietary or obsolete bolted systems cost less to buy but are harder to expand later, which is worth factoring in before you commit.
Send us your bay count, beam length, and upright height and we will return itemized pricing the same day.
Selective Racking. The most common and flexible system, offering direct access to every pallet. Ideal for warehouses handling diverse SKUs and frequent turnover. This is the bulk of our used inventory.
Drive-In Racking. High-density storage where forklifts enter the lanes. A cost-effective option for storing large volumes of identical product, though availability in used condition is intermittent.
Push-Back Racking. Nested carts on inclined rails for density without deep forklift reach. Requires careful rail matching, which is why we sell it as complete systems rather than mixed components.
Cantilever Racking. Open-front arms for pipe, steel bar, lumber, and anything long or awkward that will not sit on a standard beam level.
Components Only. Sometimes you do not need a system, you need eight beams and two uprights to finish a row. We sell components individually.
Buying used equipment requires trust. Every unit we sell goes through a strict sourcing and inspection process.
Carefully Selected Sources: We source from facility closures, relocations, and warehouse downsizings across the Southeast, which means we know the history of what we sell.
Thorough Inspections: Each component is checked for bends, rust, weld integrity, and connector wear. Columns exceeding the ANSI MH16.1 straightness tolerance are repaired or scrapped rather than sold.
Safety Standards: All systems meet current load-rating requirements, and we supply capacity documentation so your racks can carry compliant load plaques.
Restoration When Needed: Where a component is worth saving, we clean, replace hardware, or reinforce it before it goes into stock.
When buying used pallet racking in Atlanta, you need more than a reseller. Here is why businesses trust us:
We at Atlanta Pallet Racking are the most dependable local provider of warehouse storage solutions across the Atlanta Metro Area, including
Whether you manage a warehouse, distribution center, or retail backroom, we provide pallet racking services in the Atlanta area and are always ready to become your trusted warehouse equipment supplier.
Our crews know how to anchor uprights properly, level beams accurately, and install racking systems that pass inspections the first time. We've worked with everything from selective racking to drive-in systems across Atlanta warehouses. You get installations done right without callbacks or corrections.
From industrial shelving systems to mezzanine platforms and inspected used racking, we supply storage solutions built to handle heavy loads. Our products meet industry standards and come from manufacturers we trust. You get reliable equipment backed by professional installation and ongoing support.
We would love to hear from you! Please fill out this form and we will get in touch with you shortly.
"*" indicates required fields
Atlanta pallet rack systems, material handling equipment, pallet racking, lift trucks, heavy and light duty shelving, modular offices, and mezzanines for warehouse and industrial use in Atlanta, GA.
